CORAL CNC Equipment 1500W 2000W 3000W 6000W 1kw 2kw 3kw 12kw Metal Sheet Stainless Steel Carbon Aluminum Plate Coil Sheet Tube Fiber Laser Cutting Machine
CORAL Fiber Laser Cutting Machine technology uses the ultra-high energy released when the laser irradiates the surface of the metal sheet to instantly melt or vaporize the irradiated part of the metal sheet and blow away the slag with the auxiliary gas. The laser spot irradiation position is then moved by the CNC mechanical system to achieve automatic cutting. It is a high-tech equipment that integrates the most advanced fiber laser technology, CNC technology, and precision mechanical technology.
Our product advantages:
Excellent beam quality: smaller focused spot, finer cutting lines, higher work efficiency, and better processing quality.
Extremely high stability: Fiber laser, with stable performance and a lifespan of up to 100000 hours for key components.
The laser conversion rate can reach 40%, with low power consumption and low operating costs.
Note: The appearance of the machine can be customized. If you have any requirements, please consult us!
CORAL Plate and Coil Laser Cutting Machine Application:
This product can be applied to various types of steel plate materials;
CORAL Plate and Coil Laser Cutting Machine Features:
The machine body is welded with high-strength integral plates, and after high-temperature annealing, the deformation of the machine tool is greatly reduced.
It uses imported precision gear racks, linear guides, and transmission operations to achieve high precision, high efficiency, and high stability of the machine tool.
The equipment uses a laser-specific speed matching system and a high-performance servo motor drive to shorten standby time and effectively improve work efficiency by more than 30%.
Laser Cutting Machine Fiber Laser Cutting Machine Cnc Machine Cnc Cutting Machine Cnc Laser Cutting Machine Cnc Metal Cutting Machine
CORAL CNC Equipment 1500W 2000W 3000W 6000W 12000w Metal Sheet Stainless Steel Carbon Aluminum Plate Coil Sheet Fiber Laser Cutting Machine
| Model |
CRL-3015 |
CRL-4015 |
CRL-4020 |
CRL-6015 |
CRL-6020 |
| Processing range (length * width) |
3000*1500mm |
4000*1500mm |
4000*2000mm |
6000*1500mm |
6000*2000mm |
| laser power |
3000W-----12000W |
| Maximum blank line speed |
80-160m/min |
| positioning accuracy |
±0.03mm |
| repeatability |
±0.02mm |
| acceleration |
0.6-1.5G |
| power requirement |
3-phase 4-wire AC 380v/50Hz |
Cutting thickness
| Laser Power |
Carbon steel |
stainless steel |
Aluminum |
Copper |
Red Copper |
| 3000W |
1-20mm |
1-8mm |
1-6mm |
1-5mm |
1-3mm |
| 6000W |
1-22mm |
1-18mm |
1-16mm |
1-12mm |
1-6mm |
| 12000W |
1-25mm |
1-25mm |
1-25mm |
1-12mm |
1-8mm |
Preferential price
10 years of quality supplier
3-year warranty
High precision machine tool
The machine body is formed by welding rectangular tubes and carbon steel plates, and the crossbeam is made of aluminum alloy profiles. The two are then subjected to rough machining, vibration aging treatment, and precision machining processes to enhance tensile strength and guide rail stability, prevent bed deformation, and improve resistance and stability. Good rigidity, high precision, ensuring long-term stable operation of the equipment.
Fiber laser
1. High electro-optical conversion efficiency, up to 40%;
2. Special design of beam quality to assist in rapid processing of thick plates;
3. High integration of optical modules and compact overall size;
4. Support bus control function and user-friendly operation interface;
5. Industry leading anti high backlash solution
Laser cutting head
Configure EtherCAT bus communication for easy and reliable connection, faster communication cycle; The brand new large ceramic ring sensor has better durability and wear resistance, avoiding collision damage to the cutting head during the cutting process and effectively solving difficult cutting positions; Large lens, large focal width, small focal drift, conducive to long-term stable cutting; Real time monitoring (lens temperature, chamber pressure, pollution level, etc.) and displaying the working status of the cutting head through indicator lights, intelligent and efficient;
Servo-drive
Adopting bus control method to ensure precise positioning and dynamic response of optimal acceleration, which makes the automatic positioning mechanism operate smoothly, reliably, and maintenance free: XYZ axis high-power motor drive;
Chiller
The main features of the special domain fiber laser chiller are:
1. The temperature control accuracy reaches ± 1 ºC;
2. Environmentally friendly refrigerants can be selected;
3. Supports ModBus-485 communication; There are multiple settings and fault display functions;
4. It has multiple alarm protection functions: compressor delay protection; Compressor overcurrent protection; Water flow alarm; Temperature over high/low alarm
CORAL customized CNC system
The CNC laser cutting control system is a high-performance laser tube cutting motion control system independently developed and produced by Corel based on years of experience in plasma flame CNC cutting systems, laser flat cutting, and multiple laser cutting CNC systems at home and abroad. Supporting pipe types: square tube, round tube, waist round tube, elliptical tube, angle steel, channel steel, flat steel, I-beam and other special-shaped pipes.
Main uses of laser cutting machines
Mainly used for rapid cutting of various metal materials such as carbon steel, silicon steel, stainless steel, aluminum alloy, titanium alloy, galvanized sheet, etc.
Widely used in sheet metal, hardware products, steel structures, precision machinery, auto parts, nameplates, advertising, handicrafts and other industries.
CORAL LASER, a professional laser equipment manufacturer, provides you with professional services
1.Inspection and reception
Customers can visit the company's site in person or conduct on-site inspections. The company will provide professional staff for reception
2.Free sampling
Free sample service can be provided for customers
3.Free software training
4.Immediate installation guide
5.Free equipment maintenance
6.Professional workshop planning
7.two years free warranty
8.Future equipment upgrades
Production Process
Q: Do you have CE document and other documents for customs clearance?
A: Yes, we have original. At first we will show you and after shipment we will give you CE/Packing list/Commercial Invoice/Sales contract for customs clearance.
Q: Payment terms?
A:TT/West Union/Payple/LC/Cash and so on.
Q: I don't know how to use after i receive or i have problem during use, how to do?
A: We can provide team viewer/Whatsapp/Email/Phone/Skype with cam till all of your problems finished.We can also provide door service if you need.
Q: I don't know which one is suitable for me ?
A :just tell us below information
1) Max work size:choose most suitable model.
2) Materials and cutting thickness:Power of laser generator.
3) Business industries:We sell a lot and give advice on this business line.
Q: If we need CORAL technician to train us after order,how to charge?
A:1) If you come to our factory to get training,it is free for learning.And the seller also accompany you in factory 1-3 working days.(Every one learning ability is different,also according to details)
2) If you need our technician go to your local factory to teach you, you need to bear the technician's business travelling ticket / room and board/ 100 USD per day.
Q:Why the machine price not include fiber source and tube parts ?
A:Different power different tube diameter price different , that's why we list the price not include fiber source and tube parts .
Audited Supplier 
){kind=link}